Scale & Scum Remover
Dissolve Mineral Buildup. Restore the Shine.
Less Toxins. More Life.
Remove Tough Mineral Deposits Without Harsh Chemicals
Hard water deposits, soap scum, calcium buildup, and mineral stains can make even clean surfaces look dirty.
Culleoka Scale & Scum Remover is specially formulated to dissolve stubborn mineral buildup while helping restore the appearance of sinks, showers, fixtures, glass, coffee makers, and other hard surfaces.
Whether you're maintaining your home or a commercial facility, Scale & Scum Remover provides a powerful solution for one of the most common cleaning challenges.
What Makes It Different?
Dissolves Mineral Buildup
Scale & Scum Remover works by breaking down calcium, lime scale, soap scum, and hard water deposits that accumulate over time.
Instead of aggressive scrubbing, allow the product time to penetrate the buildup for easier removal.
Restores Shine
As mineral deposits are removed, glass, stainless steel, porcelain, chrome, and other hard surfaces regain their natural appearance and shine.
Designed for Everyday Maintenance
Regular use helps prevent heavy mineral accumulation, making routine cleaning faster and easier.
Best Uses
Bathrooms
- Shower Doors
- Bathtubs
- Sinks
- Toilets
- Faucets
- Tile
- Grout
- Chrome Fixtures
Kitchens
- Sinks
- Faucets
- Coffee Makers
- Stainless Steel
- Water Fountains
Commercial Facilities
- Restrooms
- Break Rooms
- Drinking Fountains
- Locker Rooms
- Kitchens
How to Use
Soap Scum
Spray directly onto the surface.
Allow 2–5 minutes of dwell time.
Wipe or scrub using a non-abrasive sponge.
Rinse thoroughly.
Hard Water Deposits
Apply directly to mineral buildup.
Allow 5–10 minutes.
Scrub as needed.
Rinse with clean water.
Coffee Makers
Add:
2 oz Scale & Scum Remover
Fill the remaining reservoir with water.
Run one complete brewing cycle.
Flush thoroughly by running two cycles of clean water before brewing coffee.
Tile & Grout
Spray directly onto grout lines.
Allow several minutes of dwell time.
Agitate using a grout brush.
Rinse clean.
Stainless Steel Fixtures
Apply to a microfiber cloth.
Wipe the surface evenly.
Buff dry for a streak-free finish.
Helpful Tips
- Allow adequate dwell time before scrubbing.
- Repeat applications may be necessary for severe mineral buildup.
- Use regularly to prevent future accumulation.
- Test specialty surfaces before use.
- Do not allow the product to dry on the surface before rinsing.
Frequently Asked Questions
What causes hard water buildup?
Hard water contains naturally occurring minerals, primarily calcium and magnesium, that remain on surfaces after water evaporates.
Can I use Scale & Scum Remover on natural stone?
Natural stone can vary greatly in composition and finish.
Always test in an inconspicuous area first and follow the care recommendations for your specific stone surface.
Can I use it on glass shower doors?
Yes.
It is excellent for removing hard water spots and soap scum from glass shower doors.
How often should I use it?
Weekly maintenance helps prevent heavy mineral buildup.
Areas with very hard water may benefit from more frequent cleaning.
Can I use it with other cleaners?
For best performance, use Scale & Scum Remover by itself and rinse thoroughly before applying other cleaning products.
Related Products
Complete your cleaning routine with:
- Natural Based Cleaner – Everyday cleaning for kitchens, bathrooms, and more.
- Probiotic Deodorizer – Eliminate odors after cleaning.
- Drain, Septic & Sewer – Keep sinks and drains working their best.
Customer Success Story
"Our glass shower doors had years of hard water spots that we thought would never come off. After using Scale & Scum Remover, the difference was incredible, and now we use it weekly to keep everything looking like new."
Shop Scale & Scum Remover
Restore the shine to your home or business.
Scale & Scum Remover helps remove stubborn mineral deposits so your surfaces look cleaner, brighter, and easier to maintain.